EN 10210 S355J0H hollow section

150X100X6mm 5mm 10mm size of S235JRH rectangular tube ex-stock can be rolling either with cold drawn according to specification EN 10219 or with hot finished as per specification EN 10210.

Galvanized square tube s235jr,galvanized steel square tube A36,HDG square steel tube is rolling from mild steel pipe and then coated zinc layer according to customers’ request.Galvanized square tube s235jr has a better chemical corrosion resistance than without galvanized coated tube.

S355jr galvanized round pipe,s235jr galvanized pipe,q345b galvanized tube with various diameters exports to Singapore,Thailand,Indonesia and Malaysia.Comparasion with S235JR galvanized pipe,S355JR galvanized and Q345B galvanized tube have a higher tensile strength.

S275J0H rectangular tube also named S275J0H rectangular hollow section and RHS S275J0H,S275J0H rectangular tube can supply as hot finished or cold formed.

Density: 7.85 kg/m3
Specification:EN 10210-2 EN 10219
Stock Size:DIA 5*40*40MM to 20*280*280MM
Stock Length:2 meter to 12 meter

S355J2 hollow section includes S355J2 rectangular hollow section and S355J2 square hollow section,S355J2 hollow section can be cold formed and hot finished.

Density: 7.85 kg/m3
Min. Yield strength 355 Mpa
Tensile strength:490-620 Mpa
Other relative grade:S235JR hollow section,S275JR hollow section,SM490 hollow section,S355JR hollow section

A500 grade a rectangular tube,a500 grade a square pipe with 100×100mm,80×80mm,120×120mm,150×150mm,180×180mm,200×200mm,250×250mm,280×280mm,300×300mm,350×350mm,pipe wall thickness range from 3 to 20mm stock in Xinsteel Industrial’s warehouse ready for shipment.

A53 grade b galvanized pipe and a106 gr b hdg pipe are both Zinc coated round pipe which widely used in industries like oil and gas transportation,hydrocarbon,automobile and boilers.

EN 10210 S355J0H hollow section includes S355J0H square hollow section and S355J0H rectangular hollow section with EN 10204 3.1 mill certificates.

Supplies condition: Cold drawn or Hot finished
Stock quantity: 520 tons
MOQ: 1 piece

S235JRH rectangular tube is one carbon-maganese structural steel material with good strength and weldability.S235JRH rectangular tube contains carbon maximum 0.17 % for tube wall thickness equal and belows 40mm.If wall thickness above 40mm,the carbon contains can reach to 0.20 %.

A36 carbon structure pipe includes ASTM A36 square hollow section,A36 rectangular hollow setion,A36 round pipe,A36 galvanized steel pipe,etc.BOILER FLUE GAS PIPE A36 with different shapes diameters in our stock ready for shipment.

High quality Galvanized rect tube q235b,SS400 Galvanized RHS pipe,HDG rectangualr steel tube are delivery with Hot finished and cold drawn,then doing hot dipped galvanized on the rectangular tubes.

Q355D rectangular hollow section,q355d square hollow section are structure steel pipes which can be used in low temperature surroundings,normally Q355D steel pipes can be replaced by S355J2 steel pipe.

High tensile strength S355JR galvanized square tube,S355J2 zinc coated square tube,s355 galvanized tube is delivery with zinc coating thickness from 20um to 50um according to customers’ demand.S355J2 zinc coated square tube shall be done low temperature imapcting test at -20 ℃.

A500b rhs rectangular tube is one kind carbon rectangular hollow section in ASTM A500/A500M specification,there are A500a rhs,A500c rhs ans A500d rhs.

Stock size:2*30*30mm to 20*300*300mm
length:2 meter to 12 meter
MOQ: 1 PIECE

Q355B rectangular hollow section,q355b square hollow section and Q355B steel pipe supplies from Chinese steel specification GB/T 3091,Old steel grade Q345B was replaced by grade Q355B.

Square tube S355J2 also called as square hollow section S355J2,the both sides length of tube are the same.Square tube S355J2 surface can be varnish,oil,hot dipped galvanized,shot blasting and painting or black.

Mill certificate:EN 10204 3.1 OR EN 10204 3.2 with ABS,BV,LR Class approval

Specification: EN 10210 AND EN 10219

Galvanized steel pipe A36,q235b galvanized steel pipe,SS400 galvanized round pipe is welded steel pipe or seamless steel pipe processing with hot dipped galvanized coated outside of pipes.

90 Degree right angle hollow section s355j2h,s275jr hollow pipe and s355j0h rectangular pipe stock in malaysian warehouse ready for shipment.Small quantity order can be accepted from our stock warehouse directly.

Cold formed welded and seamless carbon steel structural tubing a500 grade a square pipe,a500 grade b hollow pipe,a500 grade c hollow section stock with 100×100mm;150×150mm;200×200mm;250×250mm;100×150mm;120×80mm;200×150mm.

S275j0 rectangular tube,s275j2 square tube,s275jr rectangular tube stock with clear surface in our inner warehouse ready for shipment,the diameter range from 20*20-400*400mm and 20*40-400*600mm with welding and seamless typies.

HDG round pipe,galvanized steel pipe S355J2,galvanized steel tube S275JR supplies from european standard EN 10025-2 specification for structural usage.Galvanizing can increase the corrosion resistance of steel pipe and prolong its service life.

Welding s355j2h shs,s355j2 square hollow tube,s355j2 square hollow section stock in product warehouse ready for shipment,these S355J2H SHS would be bundled with iron belts and packing with woven bags,then paste shipping mark as per customer’s demands.

Price term:CIF TO PORT KELANG
Quantity: 46.520 metric tons with 12 packages
Delivery time:Stock available

A572 grade 50 rectangular pipe,a572 grade 50 square tube is a vanadium columbium alloy steel material which has an improved resistance to amtospheric corrosion used in outdoors and moist surroundings.

Hot finished Square hollow section S275JR,square tube S275JR,shs section S275JR supplies from european specification EN 10210-2 and EN 10210-1.

Density: 7.85 kg/m3
Stock dimension:2*20*20 to 25*300*300mm
Stock length:2-12 meter

High tensile strength S355JR galvanized square tube,S355J2 zinc coated square tube,s355 galvanized tube is delivery with zinc coating thickness from 20um to 50um according to customers’ demand.S355J2 zinc coated square tube shall be done low temperature imapcting test at -20 ℃.

High quality Galvanized rect tube q235b,SS400 Galvanized RHS pipe,HDG rectangualr steel tube are delivery with Hot finished and cold drawn,then doing hot dipped galvanized on the rectangular tubes.

Q355B rectangular hollow section,q355b square hollow section and Q355B steel pipe supplies from Chinese steel specification GB/T 3091,Old steel grade Q345B was replaced by grade Q355B.

Cold formed welded and seamless carbon steel structural tubing a500 grade a square pipe,a500 grade b hollow pipe,a500 grade c hollow section stock with 100×100mm;150×150mm;200×200mm;250×250mm;100×150mm;120×80mm;200×150mm.

A36 carbon structure pipe includes ASTM A36 square hollow section,A36 rectangular hollow setion,A36 round pipe,A36 galvanized steel pipe,etc.BOILER FLUE GAS PIPE A36 with different shapes diameters in our stock ready for shipment.

Q355D rectangular hollow section,q355d square hollow section are structure steel pipes which can be used in low temperature surroundings,normally Q355D steel pipes can be replaced by S355J2 steel pipe.

A572 grade 50 rectangular pipe,a572 grade 50 square tube is a vanadium columbium alloy steel material which has an improved resistance to amtospheric corrosion used in outdoors and moist surroundings.

Galvanized steel pipe A36,q235b galvanized steel pipe,SS400 galvanized round pipe is welded steel pipe or seamless steel pipe processing with hot dipped galvanized coated outside of pipes.

S235JRH rectangular tube is one carbon-maganese structural steel material with good strength and weldability.S235JRH rectangular tube contains carbon maximum 0.17 % for tube wall thickness equal and belows 40mm.If wall thickness above 40mm,the carbon contains can reach to 0.20 %.

A500 grade a rectangular tube,a500 grade a square pipe with 100×100mm,80×80mm,120×120mm,150×150mm,180×180mm,200×200mm,250×250mm,280×280mm,300×300mm,350×350mm,pipe wall thickness range from 3 to 20mm stock in Xinsteel Industrial’s warehouse ready for shipment.

Hot finished Square hollow section S275JR,square tube S275JR,shs section S275JR supplies from european specification EN 10210-2 and EN 10210-1.

Density: 7.85 kg/m3
Stock dimension:2*20*20 to 25*300*300mm
Stock length:2-12 meter

150X100X6mm 5mm 10mm size of S235JRH rectangular tube ex-stock can be rolling either with cold drawn according to specification EN 10219 or with hot finished as per specification EN 10210.

EN 10210 S355J0H hollow section includes S355J0H square hollow section and S355J0H rectangular hollow section with EN 10204 3.1 mill certificates.

Supplies condition: Cold drawn or Hot finished
Stock quantity: 520 tons
MOQ: 1 piece

Welding s355j2h shs,s355j2 square hollow tube,s355j2 square hollow section stock in product warehouse ready for shipment,these S355J2H SHS would be bundled with iron belts and packing with woven bags,then paste shipping mark as per customer’s demands.

Price term:CIF TO PORT KELANG
Quantity: 46.520 metric tons with 12 packages
Delivery time:Stock available

Galvanized square tube s235jr,galvanized steel square tube A36,HDG square steel tube is rolling from mild steel pipe and then coated zinc layer according to customers’ request.Galvanized square tube s235jr has a better chemical corrosion resistance than without galvanized coated tube.

S275j0 rectangular tube,s275j2 square tube,s275jr rectangular tube stock with clear surface in our inner warehouse ready for shipment,the diameter range from 20*20-400*400mm and 20*40-400*600mm with welding and seamless typies.

90 Degree right angle hollow section s355j2h,s275jr hollow pipe and s355j0h rectangular pipe stock in malaysian warehouse ready for shipment.Small quantity order can be accepted from our stock warehouse directly.

S355J2 hollow section includes S355J2 rectangular hollow section and S355J2 square hollow section,S355J2 hollow section can be cold formed and hot finished.

Density: 7.85 kg/m3
Min. Yield strength 355 Mpa
Tensile strength:490-620 Mpa
Other relative grade:S235JR hollow section,S275JR hollow section,SM490 hollow section,S355JR hollow section

Square tube S355J2 also called as square hollow section S355J2,the both sides length of tube are the same.Square tube S355J2 surface can be varnish,oil,hot dipped galvanized,shot blasting and painting or black.

Mill certificate:EN 10204 3.1 OR EN 10204 3.2 with ABS,BV,LR Class approval

Specification: EN 10210 AND EN 10219

A53 grade b galvanized pipe and a106 gr b hdg pipe are both Zinc coated round pipe which widely used in industries like oil and gas transportation,hydrocarbon,automobile and boilers.

S355jr galvanized round pipe,s235jr galvanized pipe,q345b galvanized tube with various diameters exports to Singapore,Thailand,Indonesia and Malaysia.Comparasion with S235JR galvanized pipe,S355JR galvanized and Q345B galvanized tube have a higher tensile strength.

HDG round pipe,galvanized steel pipe S355J2,galvanized steel tube S275JR supplies from european standard EN 10025-2 specification for structural usage.Galvanizing can increase the corrosion resistance of steel pipe and prolong its service life.

S275J0H rectangular tube also named S275J0H rectangular hollow section and RHS S275J0H,S275J0H rectangular tube can supply as hot finished or cold formed.

Density: 7.85 kg/m3
Specification:EN 10210-2 EN 10219
Stock Size:DIA 5*40*40MM to 20*280*280MM
Stock Length:2 meter to 12 meter

A500b rhs rectangular tube is one kind carbon rectangular hollow section in ASTM A500/A500M specification,there are A500a rhs,A500c rhs ans A500d rhs.

Stock size:2*30*30mm to 20*300*300mm
length:2 meter to 12 meter
MOQ: 1 PIECE