BS Grade 355E STRUCTURE PLATE

355EM steel plate,bs grade 355em,structure plate 355em is applicable to offshore structures designed to operate in the european offshore sector,bs grade 355em steel shall be made by the basic oxygen or basic electric arc furnace process.355EM steel plate shall be fully killed and made to fine grain practice.All surfaces of 355em steel plate shall be 100% visually inspected complying with BS 6512,weld repair shall not be carried out by steel manufacturers.

Technical Requirements & Additional Services for BS GR 355E steel plate:
♦ Z TEST (Z15,Z25,Z35) for through-thickness testing
♦ Charpy V-notch impacting test at -40 Degree centigrade in BS 4360
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Simulated post-weld heat treatment
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for BS 355E steel plate:

Thickness (mm)
BS 355E	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 100	> 100 ≤ 120	> 120
Yield strength (≥Mpa)	355	345
	≤ 100						> 100
Tensile strength (Mpa)	490-640

►Chemical composition for BS 355E steel plate (Ladle Analysis Max%)

Main chemical elements composition of BS 355E steel plate
C	Si	Mn	P	S	Cu	N	Nb+V	Nb
0.18	0.10-0.50	1.50	0.040	0.030	0.30	0.010	0.15	0.003-0.10
V	Alt	Cr	Mo	B	Ti	Ni	Cr+Mo+Ni+Cu
0.003-0.10