+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
DNV-GL approval high tensile strength VL AH40 angle bar,VL AH40 steel angle,VL ah40 equal angle and VL AH40 un-equal angle steels owned tensile strength within 510-650Mpa.Xinsteel stock thousands tons VL AH40 angle bar,VL AH40 equal angle and VL AH40 un-equal angle bar in port warehouses.
■ Full Data
Technical Requirements & Additional Services for VL AH40 steel angle:
♦ High tension test
♦ Low temperature impacting test
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Rolling under ASTM A6/A6M for Genenal requirements of structural used steel
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.2 with DNV-GL approval
♦ High tension test
♦ Low temperature impacting test
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Rolling under ASTM A6/A6M for Genenal requirements of structural used steel
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.2 with DNV-GL approval
■ Techicals
►Mechnical property for VL Grade AH40 ANGLE BAR:
| Yield strength (≥Mpa) | Tensile strength (Mpa) | Elongation in ≥,% | |
| 390 | 510-650 | 200mm | 50mm |
| 19 | 22 | ||
►Chemical composition for VL Grade AH40 ANGLE BAR (Heat Analysis Max%)
| Main chemical elements composition of ABS Grade AH40 | ||||||
| C | Si | Mn | P | S | Al (acid) min. | Nb |
| 0.18 | 0.10-0.50 | 0.90-1.60 | 0.035 | 0.035 | 0.015 | 0.02-0.05 |
| V | Ti | Cu | Cr | Ni | Mo | |
| 0.05-0.10 | 0.02 | 0.35 | 0.20 | 0.40 | 0.08 | |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611