SM570 ANGLE STEEL

In steel standard JIS G3106,steel angle bar grade SM570 owned the highest yield strength above 460 Mpa,and the tensile strength within 570-720 Mpa.After finished rolling these steel angle bar SM570,the original mill test certificate would be issued by mill under format EN 10204 3.1,if our customers need the third party inspections,the MTC shall be issued under EN 10204 3.2 TYPE.

Technical Requirements & Additional Services:
♦ Chemical Analysis
♦ Low temperature impacting test
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for SM570 Structural steel angle:

Thickness (mm)
SM570	≤ 16	> 16 ≤ 40	> 40 ≤ 75	> 75 ≤ 100	> 100 ≤ 160	> 160
Yield strength (≥Mpa)	460	450	430	420	420	420
	≤ 100						> 100
Tensile strength (Mpa)	570-720						570-720

►Chemical composition for SM570 Structural steel angle (Ladle Analysis Max%)

Main chemical elements composition of SM570
Thickness(mm)	C	Si	Mn	P	S
T≤50	0.18	0.55	1.60	0.035	0.035
50<T