+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
Q460E high strength low alloy structural steel angle bars owned minimum tensile strength at 550 Mpa and minimum yield strength at 460 Mpa.When rolling steel angle Q460E,the impact test shall be done at minus 40 centigrade.Xinsteel keeps thousands tons hot rolled steel angles in GB/T 706 specifications and ready for shipment.Equal angle steels Q460E,Un-equal angle steels Q460E,Inverted angle steels Q460E.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
■ Techicals
►Mechnical property for Q460E low alloy structural steel angle:
| Thickness (mm) | ||||
| Q460E | ≤ 16 | > 16 ≤ 35 | > 35 ≤ 50 | >50 |
| Yield strength (≥Mpa) | 460 | 440 | 420 | 400 |
| Tensile strength (Mpa) | 550-720 | |||
►Chemical composition for Q460E low alloy structural steel angle (Heat Analysis Max%)
| Main chemical elements composition of Q460E | ||||||||||
| C | Si | Mn | P | S | V | Nb | Ti | Al (min.) | Cr | Ni |
| 0.20 | 0.55 | 1.00-1.70 | 0.025 | 0.025 | 0.02-0.20 | 0.015-0.060 | 0.02-0.20 | 0.015 | 0.70 | 0.70 |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611