+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
High strength low alloy structural steel angles Q460C owned the minimum yield point above 460 Mpa,and tensile strength shall be above 550 Mpa.Charpy V-notch impacting test shall be done at 0 centigrade for steel angle for Q460C in GB/T 706.Steel angles,angle bars,L-profiles are used for various purposes in a number of industries such as steel
frames,brackets,trim,reinforcements and many other uses.
frames,brackets,trim,reinforcements and many other uses.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
■ Techicals
►Mechnical property for Q460C low alloy structural steel angle:
| Thickness (mm) | ||||
| Q460C | ≤ 16 | > 16 ≤ 35 | > 35 ≤ 50 | >50 |
| Yield strength (≥Mpa) | 460 | 440 | 420 | 400 |
| Tensile strength (Mpa) | 550-720 | |||
►Chemical composition for Q460C low alloy structural steel angle (Heat Analysis Max%)
| Main chemical elements composition of Q460C | ||||||||||
| C | Si | Mn | P | S | V | Nb | Ti | Al (min.) | Cr | Ni |
| 0.20 | 0.55 | 1.00-1.70 | 0.035 | 0.035 | 0.02-0.20 | 0.015-0.060 | 0.02-0.20 | 0.015 | 0.70 | 0.70 |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611