+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
When rolling steel angles GB/T 706 Q420E,the impact test shall be done at minus 40 centigrade.Q420E high strength low alloy structural steel owned minimum tensile strength at 520 Mpa and minimum yield strength at 420 Mpa.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
♦ Low temperature impacting test
♦ Cutting and welding as per end user’s demands
♦ More striction on some chemical elements contains
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
■ Techicals
►Mechnical property for Q420E low alloy structural steel angle:
| Thickness (mm) | ||||
| Q420E | ≤ 16 | > 16 ≤ 35 | > 35 ≤ 50 | >50 |
| Yield strength (≥Mpa) | 420 | 400 | 380 | 360 |
| Tensile strength (Mpa) | 520-680 | |||
►Chemical composition for Q420E low alloy structural steel angle (Heat Analysis Max%)
| Main chemical elements composition of Q420E | ||||||||||
| C | Si | Mn | P | S | V | Nb | Ti | Al (min.) | Cr | Ni |
| 0.20 | 0.55 | 1.00-1.70 | 0.025 | 0.025 | 0.02-0.20 | 0.015-0.060 | 0.02-0.20 | 0.015 | 0.40 | 0.70 |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611