+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
BS EN10216-2 specification seamless steel pipes P195GH contains P195GHTC1 and P195GHTC2,Non-destructive testing for these seamless tubes P195GH shall be done under EN 10246.Xinsteel stockholder EN10216-2 specifications grade P195GH seamless steel pipes,P235GH seamless steel tubes,P265GH boiler steel pipes,P295GH boiler steel tubes with varies wall thickness and nominal diameters.
■ Full Data
Technical Requirements & Additional Services:
♦ Normalized Heat treatment at Temp.880-940 Deg.C
♦ Flattening test according to EN 10233
♦ Ring Tensile test comply to EN 10237
♦ Normalized Heat treatment at Temp.880-940 Deg.C
♦ Flattening test according to EN 10233
♦ Ring Tensile test comply to EN 10237
♦ Drift expanding test comply to EN 10234
♦ Impacting test comply to EN 10045-1
♦ Issued Orginal Mill test certificate under EN10204 3.1/3.2 FORMAT
♦ Surface Protection:Black,Varnish,Hot Dip Galvanized,Coating with shop prime
♦ Impacting test comply to EN 10045-1
♦ Issued Orginal Mill test certificate under EN10204 3.1/3.2 FORMAT
♦ Surface Protection:Black,Varnish,Hot Dip Galvanized,Coating with shop prime
■ Techicals
►Mechnical property for P195GH boiler steel pipes:
|
P195GH |
||||
|
Yield strength (≥Mpa) |
T≤16 |
16<T≤40 |
40<T≤60 |
60<T≤100 |
|
195 |
- |
- |
- |
|
|
Tensile strength (≥Mpa) |
320-440 |
|||
►Chemical composition fo P195GH Boiler steel pipes (Heat Analysis Max%)
|
Main chemical elements composition of P195GH |
||||||
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
|
0.13 |
0.35 |
0.70 |
0.025 |
0.020 |
0.30 |
0.08 |
|
Ni |
Alt |
Cu |
Nb |
Ti |
V |
Cr+Cu+Mo+Ni |
|
0.30 |
0.02 |
0.30 |
0.01 |
0.04 |
0.02 |
0.70 |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611