+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
High strength square hollow sections S355K2H in european standard EN 10210-1 with minimum yield strength at 355Mpa and low temperature impacting test at minus 20 Deg.C.Xinsteel stockholder thousands tons different sizes of hot rolled hot formed finished square hollow section S355K2H with seamless type and welded type.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test according to EN10045-1
♦ Wall thickness tolerance according to EN10210-2
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Surface Protection:Black,Varnish,Hot Dip Galvanized,Pre-Galvanized,Coating with shop prime.
♦ Low temperature impacting test according to EN10045-1
♦ Wall thickness tolerance according to EN10210-2
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Surface Protection:Black,Varnish,Hot Dip Galvanized,Pre-Galvanized,Coating with shop prime.
■ Techicals
►Mechnical property for S355K2H Square Hollow Sections:
|
Thickness (mm) |
||||||
|
|
≤ 16 |
> 16 ≤ 40 |
> 40 ≤ 63 |
> 63 ≤ 80 |
> 80 ≤ 100 |
> 100 ≤ 120 |
|
Yield strength (≥Mpa) |
355 |
345 |
335 |
325 |
315 |
295 |
|
|
< 3 |
≥ 3 ≤ 100 |
> 100 ≤ 120 |
|||
|
Tensile strength (Mpa) |
510-680 |
470-630 |
450-600 |
|||
►Chemical composition for S355K2H Square Hollow Sections (Ladle Analysis Max%)
|
Main chemical elements composition of S355K2H |
||||||
|
Thickness(mm) |
C |
Si |
Mn |
P |
S |
N |
|
T≤40 |
0.22 |
0.55 |
1.60 |
0.030 |
0.030 |
|
|
40<T≤120 |
0.22 |
|||||
Tel：+86 371 55057610 
Fax： +86 371 5505 7611