■ Overview
Steel angle bar S420M is low alloy steel which is mainly used to manufacture the plants of factory,the common constructure and construction machinery and equipment.Xinsteel stockholder thousands tons different sizes of EN10025-4 S420M steel angles,S420M angle steels,S420M equal angle steel,S420M un-equal angle steels and S420M inverted angle steels.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
■ Techicals
►Mechnical property for S420M Structural steel angles:
Thickness (mm) | ||||||
S420M | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 |
Yield strength (≥Mpa) | 420 | 400 | 390 | 380 | 370 | 365 |
≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 | ||
Tensile strength (Mpa) | 520-680 | 500-660 | 480-640 | 470-630 | 460-620 |
►Chemical composition for S420M Structural steel angles (Heat Analysis Max%)
Main chemical elements composition of S420M | ||||||
C | Si | Mn | P | S | Nb | V |
0.16 | 0.50 | 1.70 | 0.030 | 0.025 | 0.05 | 0.12 |
Al(total) | Ti | Cr | Ni | Mo | Cu | N |
≥0.02 | 0.05 | 0.30 | 0.80 | 0.20 | 0.55 | 0.025 |