■ Overview
TMCP steel angles S355ML under steel standard EN 10025-4.Structural Steel angles S355ML shall be done low temperature impacting test under minus 50 centi degree.Xinsteel keeps thousands tons hot rolled steel angles in EN10025-4 specifications and ready for shipment.Equal angle steels EN 10025-4 S355ML,Un-equal angle steels S355ML,Inverted angle steels S355ML.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
■ Techicals
►Mechnical property for S355ML Structural steel angles:
Thickness (mm) | ||||||
S355ML | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 |
Yield strength (≥Mpa) | 355 | 345 | 335 | 325 | 325 | 320 |
≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 | ||
Tensile strength (Mpa) | 470-630 | 450-610 | 440-600 | 440-600 | 430-590 |
►Chemical composition for S355ML Structural steel angles (Heat Analysis Max%)
Main chemical elements composition of S355ML | ||||||
C | Si | Mn | P | S | Nb | V |
0.14 | 0.50 | 1.60 | 0.025 | 0.020 | 0.05 | 0.10 |
Al(total) | Ti | Cr | Ni | Mo | Cu | N |
≥0.02 | 0.05 | 0.30 | 0.50 | 0.10 | 0.55 | 0.015 |