■ Overview
Xinsteel roll S235J0 angle steel bars completely according to standard EN 10025-2 and issued the original mill test certificate under Type EN 10204 3.1.Steel angles s235j0,angle bars S235J0,L-profiles S235J0 are used for various purposes in a number of industries such as steel frames,brackets,trim,reinforcements and many other uses.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
■ Techicals
►Mechnical property for S235J0 carbon steel angles:
Thickness (mm) | |||||||||
S235J0 | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 ≤ 150 | > 150 ≤ 200 | > 200 ≤ 250 | > 250 |
Yield strength (≥Mpa) | 235 | 225 | 215 | 215 | 215 | 195 | 185 | 175 | 175 |
< 3 | ≥ 3 ≤ 100 | > 100 ≤ 150 | > 150 ≤ 250 | > 250 | |||||
Tensile strength (Mpa) | 360-510 | 360-510 | 350-500 | 340-490 | 340-490 |
►Chemical composition for S235J0 mild steel anlge bars (Ladle Analysis Max%)
Main chemical elements composition of S235J0 | |||||||
Thickness(mm) | C | Si | Mn | P | S | N | Cu |
T≤16 | 0.17 | ... | 1.40 | 0.030 | 0.030 | 0.012 | 0.55 |
16<T≤40 | 0.17 | ||||||
40<T | 0.17 |