St37-3 ANGLE STEEL

St37.3 steel in steel standard DIN 17100 which applies to steel sections (including wide flange beams),steel bars,steel angles,wire rods,flat products such as steel strip,steel plate,steel wide flats,seamless and welded steel pipes,square and rectangular hollow sections,forgings and semi-finished products in the general structural steels which are delivered in the hot formed or normalized condition after production.Xinsteel onwed ten thousands tons carbon steel angle bars St37-3 in our port warehouse which is ready for shipment.Welcome customers inquiry of steel plate St37.3 from Xinsteel now.

Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands 

►Mechnical property for St37-3 Mild steel angles:

Thickness (mm)
St37-3	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80
Yield strength (≥Mpa)	235	225	215	215	215
	< 3	≥ 3 ≤ 100			> 100
Tensile strength (Mpa)	360-510	340-470			340-470

►Chemical composition for St37-3 Mild steel angles (Product Analysis Max%)

Main chemical elements composition of St37-3
C	Si	Mn	P	S	N
0.19	0.60	1.70	0.050	0.050	0.010