S460ML STEEL PLATE

Structural S460ML,S460ML STEEL PLATE,S460ML STEEL SHEET is in steel standard EN 10025-4.TMCP heat treatment and Low temperature impacting test under -50 centigrade shall be done for steel plate S460ML.Steel plate S460ML shall be suitable for welding,and general requirements for arc welding of the steel S460ML shall be given in EN 1011-2.S460ML steel plate is also suitability for hot-dip zinc-coating,this requirements shall be agreed between manufacturer and purchaser.Mill test certificate of low alloy steel plate S460ML shall be issued under format EN 10204 3.1.

Technical Requirements & Additional Services for S460ML STEEL PLATE:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands

►Mechnical property for S460ML STEEL PLATE:

Thickness (mm)
S460ML	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100
Yield strength (≥Mpa)	460	440	430	410	400	385
	≤ 40		> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100
Tensile strength (Mpa)	540-720		530-710	510-690	500-680	490-660

►Chemical composition for S460ML STEEL PLATE (Heat Analysis Max%)

Main chemical elements composition of S460ML STEEL PLATE
C	Si	Mn	P	S	Nb	V
0.16	0.60	1.70	0.025	0.020	0.05	0.12
Al(total)	Ti	Cr	Ni	Mo	Cu	N
≥0.02	0.05	0.30	0.80	0.20	0.55	0.025