S460M STEEL PLATE

With the minimum yield strength at 460 Mpa,S460M steel plate owned a higher strength among structural steel grades.The tensile strength of S460M,S460M STEEL PLATE,S460M steel sheet shall be within 540-720 Mpa for the steel plate thickness equal and below 40 millimeters.Low temperature impacting test at minus 20 centigrade shall be done for low alloy steel plate S460M.When rolling steel plate S460M,a maximum carbon content of 0.20% applies.Now xinsteel owned thousands tons low alloy steel plates in our port warehouse,contact xinsteel for the stock lists for S460M steel plate.

Technical Requirements & Additional Services for S460M steel plate:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands

►Mechnical property for S460M steel plate:

Thickness (mm)
S460M	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100
Yield strength (≥Mpa)	460	440	430	410	400	385
	≤ 40		> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100
Tensile strength (Mpa)	540-720		530-710	510-690	500-680	490-660

►Chemical composition for S460M steel plate (Heat Analysis Max%)

Main chemical elements composition of S460M steel plate
C	Si	Mn	P	S	Nb	V
0.16	0.60	1.70	0.030	0.025	0.05	0.12
Al(total)	Ti	Cr	Ni	Mo	Cu	N
≥0.02	0.05	0.30	0.80	0.20	0.55	0.025