■ Overview
EN 10025-2 S235JR,S235JR steel plate,S235JR steel sheet common carbon structural steel materials are mainly used to produce structural parts of the bolted and welded steel in dustrial area.The minimum yield strength of carbon steel plate S235JR shall be 235 Mpa for nominal thickness,and tensile strength of structural steel plate S235JR shall be within 360-510Mpa.1Mpa is equal to 1 N/mm2.Now Xinsteel can offer S235JR carbon steel plate with the maximum thickness of 650mm,and Normalized heat treatment or Controlled rolled is ok for delivery these heavy steel plates.
■ Full Data
Technical Requirements & Additional Services for S235JR steel plate:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
■ Techicals
►Mechnical property for S235JR steel plate:
►Chemical composition for S235JR steel plate (Ladle Analysis Max%)
Thickness (mm) | |||||||||
S235JR | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 ≤ 150 | > 150 ≤ 200 | > 200 ≤ 250 | > 250 |
Yield strength (≥Mpa) | 235 | 225 | 215 | 215 | 215 | 195 | 185 | 175 | 175 |
< 3 | ≥ 3 ≤ 100 | > 100 ≤ 150 | > 150 ≤ 250 | > 250 | |||||
Tensile strength (Mpa) | 360-510 | 360-510 | 350-500 | 340-490 | 340-490 |
►Chemical composition for S235JR steel plate (Ladle Analysis Max%)
Main chemical elements composition of S235JR steel plate | |||||||
Thickness(mm) | C | Si | Mn | P | S | N | Cu |
T≤16 | 0.17 | ... | 1.40 | 0.035 | 0.035 | 0.012 | 0.55 |
16<T≤40 | 0.17 | ||||||
40<T | 0.20 |