■ Overview
DNV Grade D steel plate is common strength shipbuilding plate which is mainly used for built hull of vessels,ship body construction.Normally when rolling,Air rolled and Control Rolled is ok for ship plate DNV Grade D with the thickness equal and belows 40 Millimeters,and for thickness above 40mm,the heat treatment shall be Normalised or TMCP,these two technical treatment would improve steel strength in yield and tensile points for shipbuilding steel plate DNV Grade D.
■ Full Data
Technical Requirements & Additional Services for DNV D steel plate:
♦ High tension test
♦ Z-Test (Z15,Z25,Z35)
♦ Low temperature impacting test
♦ Ultrasonic test under ASTM A435,A577,A578
♦ Cetificated by ABS,LR,GL,BV,DNV,KR,NK,CCS,RINA
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ High tension test
♦ Z-Test (Z15,Z25,Z35)
♦ Low temperature impacting test
♦ Ultrasonic test under ASTM A435,A577,A578
♦ Cetificated by ABS,LR,GL,BV,DNV,KR,NK,CCS,RINA
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
■ Techicals
►Mechnical property for DNV Grade D shipbuilding plate:
►Chemical composition for DNV Grade D ship plate (Heat Analysis Max%)
Yield strength (≥Mpa) | Tensile strength (Mpa) | Elongation in ≥,% | |
235 | 400-520 | 200mm | 50mm |
21 | 24 |
►Chemical composition for DNV Grade D ship plate (Heat Analysis Max%)
Main chemical elements composition of DNV Grade D | ||||
C | Si | Mn | P | S |
0.21 | 0.10-0.35 | 0.60 | 0.035 | 0.035 |