A573 Grade 65 STEEL PLATE

Hot rolled ASTM A573 specification A573 Grade 65,A573Gr65 steel plate,A573Gr65 steel sheet stock export to Indonesia,Singapore and Malaysia.ASTM A573/A573M A573 Grade 65 steel plate shall be made to fine grain practice,when the steel plate A573 Grade 65 is to be welded,it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized.The carbon structural steel plate of A573Gr65 shall be conform to the requirements prescribed in the below table.The yield strength of steel plate A573Gr65 shall above 240Mpa,and the tensile strength of A573 Grade 65 shall be within 450-530Mpa.

Technical Requirements & Additional Services for A573 Grade 65 steel plate:
♦ Low temperature impacting test
♦ Ultrasonic test under ASTM A435/A577/A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Rolling under ASTM A6/A6M for Genenal requirements of structural used steel
♦ A573/A573M specification for structural carbon steel plates of improved toughness 

►Mechnical property for A573 Grade 65 steel plate:

Yield strength (≥Mpa)	Tensile strength (Mpa)	Elongation in ≥,%
240	450-530	200mm	50mm
		20	23

►Chemical composition for A573 Grade 65 steel plate (Heat Analysis Max%)

Main chemical elements composition of A573 Grade 65 steel plate
Thickness(mm)	C	Si	Mn	P	S
T≤13	0.24	0.15-0.40	0.85-1.20	0.035	0.04
13<T	0.26