HOT ROLLED STAINLESS PLATE A240 TP304L

HOT ROLLED STAINLESS PLATE A240 TP304L is one ultra-low carbon stainless steel material,which is very common used in the production of equipment in advantage of its good comprehensive properties including corrosion resistance and formability.Stainless steel sheet A240 TP304L has the UNS Desigation as S30403,stainless steel plate TP 304 UNS as S30400.The lower carbon content of stainless steel plate A240 TP 304L minimizes the carbides precipitated in the heat-affected zone near the weld,which can lead to intergranular corrosion (welding erosion) in stainless steel in some environments.

Technical Requirements & Additional Services for Stainless steel plate A240 TP 304L:
♦  Ultrasonic examination comply to A578/A578M A577/A577M A435/A435M
♦  Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2 
♦  PMI test report,Cutting and welding as per end user’s demands 
♦  Packing with water-resistance paper and Non-fumigation wooden crates
♦  Practices for detecting susceptibility to Intergranular corrosion in Austenitic stainless steels
♦  Paper Interleave,Polyethylene Film coating （PE COAT）for cold rolled stainless steels

►Mechnical property for HOT ROLLED STAINLESS PLATE A240 TP304L

Stainless steel sheet A240 TP304L
Yield strength (≥Mpa)	Tensile strength (≥Mpa)	Elogation in 50mm min. %	Hardness, Max
			Brinell HBW	Rockwell HRBW
170	485	40	201	92

►Chemical composition for HOT ROLLED STAINLESS PLATE A240 TP304L (Heat Analysis Max%)

Main chemical elements composition of Stainless steel sheet A240 TP304L
C	Mn	P	S	Si	Cr
0.030	2.00	0.045	0.030	0.75	18.0-20.0
Ni	N	Cu	Mo	Al	Ti
8.0-12.0	0.10	-	-	-	-