+86 371 55057610 
inquiry@xsteelplate.com
■ Overview
Stainless steel plate A240 436 shall be following general requirements in specification A480 / A480M,test methods for detecting detrimental intermetallic phase in Ferritic stainless steels according to A923.Unless otherwise specified in the applicable material specification or the purchase order,marking for stainless steel sheet A240 436 shall be including hte name or mark of manufacturer,material identification numner,type of steel,heat number,and dimension.
■ Full Data
Technical Requirements & Additional Services for HOT ROLLED STAINLESS PLATE A240 436:
♦ Annealing,Solution Annealing,Pickling.
♦ Annealing,Solution Annealing,Pickling.
♦ Definiations for Mechanical testing comply to A370
♦ Ultrasonic examination comply to A578/A578M A577/A577M A435/A435M
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ PMI test report,Cutting and welding as per end user’s demands
♦ Packing with water-resistance paper and Non-fumigation wooden crates
♦ Ultrasonic examination comply to A578/A578M A577/A577M A435/A435M
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ PMI test report,Cutting and welding as per end user’s demands
♦ Packing with water-resistance paper and Non-fumigation wooden crates
■ Techicals
►Mechnical property for stainless steel sheet A240 436
|
stainless steel plate A240 436 |
||||
|
Yield strength (≥Mpa) |
Tensile strength (≥Mpa) |
Elogation in 50mm min. % |
Hardness, Max |
|
|
Brinell HBW |
Rockwell HRBW |
|||
|
240 |
450 | 22 | - |
89 |
►Chemical composition for stainless steel sheet A240 436 (Heat Analysis Max%)
|
Main chemical elements composition of stainless steel plate A240 436 |
|||||
|
C |
Mn |
P |
S |
Si |
Cr |
|
0.12 |
1.0 |
0.040 |
0.030 |
1.0 |
17-19 |
|
Ni |
N |
Cb |
Ti |
Al |
Cu |
|
0.50 |
0.03 |
5*C-0.8 |
- |
- |
- |
Tel：+86 371 55057610 
Fax： +86 371 5505 7611