HOT ROLLED STAINLESS PLATE A240 430

Stainless steel plate A240 430 is an ideal substitute for stainless steel plate A240 304 but A240 430 has a better advantage in price.HOT ROLLED STAINLESS PLATE A240 430 has good corrosion resistance and general steel,thermal conductivity is better than austenite stainless steels and thermal expansion coefficient is smaller than austenite stainless steels.However,stainless steel sheet A240 TP 430 can not resist the oxidation caused by the chemicals in the air,because the acidic chemicals in the air are more and more,so stainless steel sheet A240 TP 430 is often used for a period of time,there will still be oxidation (rust) due to unnatural factors.

Technical Requirements & Additional Services for Stainless steel plate A240 430:
♦  Ultrasonic examination comply to A578/A578M A577/A577M A435/A435M
♦  Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2 
♦  No.1 Surface with solid solution and pickling
♦  Paper Interleave,Polyethylene Film coating （PE COAT）for cold rolled stainless steels
♦  PMI test report,Cutting and welding as per end user’s demands 
♦  Packing with water-resistance paper and Non-fumigation wooden crates

►Mechnical property for Stainless sheet A240 TP 430

HOT ROLLED STAINLESS PLATE A240 430
Yield strength (≥Mpa)	Tensile strength (≥Mpa)	Elogation in 50mm min. %	Hardness, Max
			Brinell HBW	Rockwell HRBW
205	450	22	183	89

►Chemical composition for Stainless sheet A240 TP 430 (Heat Analysis Max%)

Main chemical elements composition of HOT ROLLED STAINLESS PLATE A240 430
C	Mn	P	S	Si	Cr
0.12	1.0	0.040	0.030	1.0	16-18
Ni	Mo	V	W	Al	Ti
0.75	-	-	-	-	-