HOT ROLLED STAINLESS STEEL PLATE A240 304

Hot rolled stainless plate A240 304 also can be used in high temperature which is less than 650 ℃.In 65% boliing nittric acid,Stainless steel sheet A240 TP304 has strong corrosion resistance,and Stainless steel plate AISI 304 also has good corrosion resistance to alkaline solutions and most organic and inorganic acids.If need lower carbon contains in 304,then can choose stainless steel plate A240 304L.

Technical Requirements & Additional Services for Stainless steel sheet A240 TP304:
♦  Ultrasonic examination comply to A578/A578M A577/A577M A435/A435M
♦  Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2 
♦  PMI test report,Cutting and welding as per end user’s demands 
♦  Practices for detecting susceptibility to Intergranular corrosion in Austenitic stainless steels
♦  Paper Interleave,Polyethylene Film coating （PE COAT）for cold rolled stainless steels
♦  Packing with water-resistance paper and Non-fumigation wooden crates

►Mechnical property for Hot rolled stainless plate A240 304

stainless steel plate AISI 304
Yield strength (≥Mpa)	Tensile strength (≥Mpa)	Elogation in 50mm min. %	Hardness, Max
			Brinell HBW	Rockwell HRBW
205	515	40	201	92

►Chemical composition for Hot rolled stainless plate A240 304 (Heat Analysis Max%)

Main chemical elements composition of stainless steel plate AISI 304
C	Mn	P	S	Si	Cr
0.08	2.00	0.045	0.030	0.75	18.0-20.0
Ni	N	Cu	Mo	Al	Ti
8.0-11.0	0.10	-	-	-	-